I have the problem when I am adding the core "memory interface generator" in step 3.1 works and is per the figure, but the auto configuration of the block in step 4 doesn't appear to work because the figure in 4.2 looks different.
I have started the project by downloading the Nexsys DDR board file and using that board file from section 1 as that would be the first thing that I checked. Please let me know where I might have gone wrong.
Question
jocularjj
Hey I have followed the tutorial and I have the memory unit not enumerate correctly. It's block by the same name appears as a 2 port block. tutorial from nexys-4-ddr-getting-started-with-microblaze-servers found at https://reference.digilentinc.com/learn/programmable-logic/tutorials/nexys-4-ddr-getting-started-with-microblaze-servers/start
I have the problem when I am adding the core "memory interface generator" in step 3.1 works and is per the figure, but the auto configuration of the block in step 4 doesn't appear to work because the figure in 4.2 looks different.
I have started the project by downloading the Nexsys DDR board file and using that board file from section 1 as that would be the first thing that I checked. Please let me know where I might have gone wrong.
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.