gislair Posted February 16, 2017 Share Posted February 16, 2017 Hi folks! I'm planning to make my own I/O extension board for the ZYBO, connecting directly through JB to JE. Therefore I need the exact dimensions of the board itself and the exact location of the connectors JB to JE in respect to let's say the left edge of the board. Is there somebody around that could provide that information? Thanks in advance. Thomas Link to comment Share on other sites More sharing options...
Bianca Posted February 16, 2017 Share Posted February 16, 2017 Hello @gislair, Please see the file attached. Best regards, Bianca Zybo mech_mm.PDF Link to comment Share on other sites More sharing options...
gislair Posted February 16, 2017 Author Share Posted February 16, 2017 Perfect. Thank you for your ultra fast response! Greetings Link to comment Share on other sites More sharing options...
ADT-Tsuneki Posted November 26, 2018 Share Posted November 26, 2018 Hello folks, Could I ask, what about "Zybo Z7-10/20" ? Thank you. Link to comment Share on other sites More sharing options...
jpeyron Posted November 26, 2018 Share Posted November 26, 2018 Hi @ADT-Tsuneki, We unfortunately do not have a mechanical design or 3D step files available for the Zybo Z7. What specific dimensions are you looking for and we can use a caliper to get them for you. thank you, Jon Link to comment Share on other sites More sharing options...
ADT-Tsuneki Posted November 28, 2018 Share Posted November 28, 2018 Hello jpeyron-san, Thank you for your reply. I want to know the positions of each connectors for designing a custom case. Thank you. Link to comment Share on other sites More sharing options...
JColvin Posted November 28, 2018 Share Posted November 28, 2018 Hi @ADT-Tsuneki, In the interest of making sure I understand your request, when you say connectors, are you just referring to all of the connectors around the edge of the board, such as the microUSB port, Ethernet port, Pmod ports, audio jacks, etc., but not needing to know details about the onboard push buttons on the Zybo Z7 board? Thanks, JColvin Link to comment Share on other sites More sharing options...
ADT-Tsuneki Posted December 4, 2018 Share Posted December 4, 2018 Hello JColvin-san Thank you for your reply. My request is very simple. I need to the file like as "Zybo mech_mm.PDF" for Zybo Z7 board. Off course, It is better if positions of buttons are described, but it is not necessary now. I'd really appreciate that. Link to comment Share on other sites More sharing options...
JColvin Posted December 4, 2018 Share Posted December 4, 2018 Hi @ADT-Tsuneki, I confirmed that we do not have such a file available, but our design engineer did take the time to create the following image which should have the dimensions you need. Thanks, JColvin Link to comment Share on other sites More sharing options...
ADT-Tsuneki Posted December 8, 2018 Share Posted December 8, 2018 Hello JColvin-san Thank you for your information. That's nice of you ! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.