Jump to content
  • 0

CMOD A7 No Valid Target error


peter

Question

Hi,

I'm having trouble connecting the CMOD A7 board through the Hardware Manager. When I click on Open Target - Local server, I get the "No valid Target" error message. I reinstalled Vivado 2016 and earlier version a couple of times with no help. I checked the cable driver log(listed below), it seems the drivers were installed correctly. The USB port shows up in Device manager. I'm using Win7 64 bit OS. Please help.

 

Thanks

Peter

-------------------------------drive installation log-------------------------------

WDREG utility v10.21. Build Aug 31 2010 14:21:54
WDREG utility v10.21. Build Aug 31 2010 14:21:54
Driver Installer - Version 1.22
Already in the installer executable location.
DriverInstaller->OS Version = Windows NT and later.
 Major Version = 6, Minor Version = 1, SP = 1.
User is in the admin group.
number of applications using Windriver = 1.
number of connected devices = 0.
number of applications using Windriver = 1.
number of connected devices = 0.
Installing WinDriver6...
 wdreg exepath=C:\Xilinx\Vivado\2016.3\data\xicom\cable_drivers\nt64\wdreg.exe.
 install command=C:\Xilinx\Vivado\2016.3\data\xicom\cable_drivers\nt64\wdreg.exe -silent -inf C:\Xilinx\Vivado\2016.3\data\xicom\cable_drivers\nt64\windrvr6.inf install.
 Installer exit code = 0.
 wdreg exepath=C:\Xilinx\Vivado\2016.3\data\xicom\cable_drivers\nt64\wdreg.exe.
 install command=C:\Xilinx\Vivado\2016.3\data\xicom\cable_drivers\nt64\wdreg.exe -silent -inf C:\Xilinx\Vivado\2016.3\data\xicom\cable_drivers\nt64\xusbdrvr.inf install.
 Installer exit code = 0.
DriverInstaller->ImagePath=\SystemRoot\System32\drivers\xpc4drvr.sys.
 File version of C:\Windows\system32\drivers\xpc4drvr.sys is 1041.
 File version of C:\Xilinx\Vivado\2016.3\data\xicom\cable_drivers\nt64\xpc4drvr.sys is 1041.
 File version of C:\Windows\system32\drivers\xpc4drvr.sys is 1041.
 Driver xpc4drvr.sys version = 1.0.4.1.
DriverInstaller->XilinxPC4Driver is running.
Driver installation successful.
InstallPath="C:\Xilinx\Vivado\2016.3\data\xicom\cable_drivers\nt64\"
Running digilent installer...

<<<<< Digilent Adept Runtime Setup >>>>>
Installer version: 1.4.6 release: 2015/12/08
Digilent Software Path: C:\Program Files (x86)\Digilent

Your system is up-to-date with the components of this installer.
Driver status 1 = "0"
Driver status 2 = "0"

 

Link to comment
Share on other sites

6 answers to this question

Recommended Posts

A note - after seeing a separate thread, where it was mentioned that the USB should not show up in Device manager as COM ports, I gave it a try. It did not make a difference. Although that thread is about a different board.

Regards

Peter

Link to comment
Share on other sites

Hi Jon,

It appears my installed is an earlier version. Will this make a difference?

I have also since tried the USB-UART port and I can see communication through PUTTY. There is probably built-in test program for the ram as I can see the screen prints saying RAM tests passed.

 

Regards

Peter

 

 

Capture.PNG

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...