QSPI boot petalinux in zybo z7-10

[Rishabh kanojiya]

while booting the petalinux through qspi i have to write the boot.bin , image.ub , boot.scr in respective offsets as mentioned in UG-1144 but the size of image.ub exceeds to that of our flash size(16Mib) i have tried the size reduction method for image.ub but still the size is large any help for booting it in qspi mode .also while selecting jffs2 file system the error of file system not supported for source command occurs any help in this.

 

[Ionel]

sf write source_RAM_address destination_QSPI_FLASH_address length_in_bytes
So qspi dose not have over 268435456 bytes of memory for zybo-z7. (16 MB Quad-SPI Flash)