About temperture and humidity specification of Zybo Z7-20 and Pmod LVLSHFT.

[intothewild]

Hello, this is my first post on Digilent Forums.

I would like to know the temperture and humidity specification for Zybo z7-20 and Pmod LVLSHFT boards, as Temperature and Humidity Rates in Genesys2 - Off Topic - Digilent Forum. 

But I could not find any info about that from pruduct pages and specsheets. 

Does anyone know what the ranges in temperature and humidity for these boards to be able to run fine?

Thank you.

 

 

 

 

[JColvin]

Hi @intothewild,

Much like for the Genesys 2, Digilent does not have specific humidity data for the Zybo Z7-20 (or -10) and the Pmod LVLSHFT boards.

Otherwise, the Zybo Z7-20 (or -10) and the Pmod LVLSHFT should operate in the 0 deg C to +70 deg C temperature range.

As a side note, I'm not readily finding humidity for most components, even for things like the Zynq 7020 SoC within the various Xilinx/AMD datasheets. My semi-educated guess (as opposed to official answer) is that the modules would normally want to operate in a 10% to 90% relative humidity non-condensing environment.

Let me know if you have any questions.

Thanks,
JColvin

[intothewild]

Hello JColvin,

And thank you for your reply!

I understand that and just keep my mind about humidity.

According to AMD/Xilinx Device Reliability Report (UG116), the company may gurantee the device environmental condition with that reliability test result.

 

Anyway your reply is great help for me.

 

thanks, 

intothewild.