ADP3250 fw 3.22.13

[bryan78]

When I am using the various protocols like UART under Logic, I can not get it to trigger correctly when using the line 1 in device options.  If I change it to use line 2 then the device triggers as expected.   I am not exactly sure what the difference in functionality between the 2 memory setting but the first just doesn't seem to work correctly and that is the one it defaults to when starting a new workspace

[attila]

Hi @bryan78

Which software version are you using ?
Could you provide more detail about the issue ? It seems to me working correctly. I notices some delay with Protocol/UART/Spy at lower rates, which needs improvement in the 'firmware'.

[bryan78]

Sorry it took me a while to get back.

Here I am triggering on break for uart and letting it run on repeat. after a while it just stops updating but says triggering. When using the smaller memory size It continues to repeat trigger.  I took a video to help explain the problem.  I am running it in Ethernet connection.  The versions should be visible in video.

[attila]

Hi @bryan78

It is corrected in the latest version:

 

[bryan78]

11 minutes ago, attila said:

Hi @bryan78

It is corrected in the latest version:

 

That looks like it fixes it, thank you

[attila]

Hi @bryan78

Thanks for the observation.