MIG project for ARTY 100

[digiuser1970]

Where is the announced MIG project for ARTY 100?

The reference manual

https://digilent.com/reference/programmable-logic/arty-a7/reference-manual

says:

The MIG Wizard will require the fixed pin-out of the memory signals to be entered and validated before generating the IP core. For your convenience, an importable UCF file is provided on the Arty A7 Resource Center to speed up this process. It is included in the “MIG Project” design resource download. This download also includes a .prj file that can be imported into the wizard to automatically configure it with the options found in Table 2.

 

Now, where is it?

We urgently need to evaluate a DDR-Design for an ARTIX 100 to decide whether to go with Xilinx A7 or not.

Alternatively you may want to complete the table in the docs with a complete description of the bank setting to be done in the MIG in order to obtain the wiring you are using, or at least upload this xdc.

 

Thanks.

 

[Viktor Nikolov]

The Arty A7 board file comes with the configuration for MIG.

For instructions on setting up the MIG on Arty A7, you can refer to the first chapter of this tutorial. The tutorial is focused on MicroBlaze; nevertheless, setting up the MIG is the same for both MicroBlaze and PL logic.