Programming FPGA with Analog Discovery 2 with JTAG protocol

[josan]

Would be possible to program an FPGA bitstream through AD2 and WaveForms SDK, taking into account that JTAG protocol is included in WaveForms?

Thanks in advance.

[attila]

Hi @josan

The WaveForms application only provides JTAG protocol interpreter.
JTAG programming can be implement with any device which has 4 DIO lines, but writing such application would be complicated.
You can use Adept application or Adept utilities / djtgcfg application and any USB-JTAG cable/module to program most of the Xilinx FPGAs. Note this is only tested for FPGA variants which are used on Digilent products.

https://digilent.com/reference/software/adept/start

https://digilent.com/reference/programmers/start