HS2 JTAG Cable with VITIS

[Christian Bucari]

Is the HS2 JTAG cable compatible with VITIS 2023.1 ? It looks like no. If no, same question for the HS3 cable.

Thanks

[JColvin]

Hi @Christian Bucari,

Where do you see that any of the Digilent JTAG devices are not compatible with Vitis 2023.1?

I just successfully configured a Zedboard in 2023.1 with the JTAG HS3 and the JTAG HS2.

Are you not able to detect/configure the downstream FPGA with the JTAG HS2 on your particular OS?

Thanks,
JColvin

[Christian Bucari]

Hi JColvin,

Thank you for responding. I was just asking if it is supposed to work or not. So you answered my question.

On my side with VITIS 2023.1, "Program Device" as well as "Debug" fail. Program Device gives no indication and Debug returns:

Error while launching program: 
Could not find ARM device on the board for connection 'ikmod'.
Check if the target is in:
1. Split JTAG - No operations are possible with ARM DAP.
2. Non JTAG bootmode - Bootrom may need time to enable DAP.
Please try again...

I confirm that there is no split JTAG and the card is in JTAG bootmode. 

Everything works perfectly with the old SDK (2019). I can program the device, debug, etc.

Thanks

Christian