We updated PCs to Fedora 36 and Vivado no longer recognizes Digilent HS3 programmers.
I can see that the devices are recognized by the OS using "lsusb" and "dmesg", but vivado does not show the programmer in the Vivado gui.
I know the HS3 and target FPGA device are good because the hardware works with Vivado on Windows. The issue is with Fedora 36 and Digilient HS3. This setup worked with Fedora 35.
Here is the output from "lsusb":
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 003: ID 8087:0025 Intel Corp. Wireless-AC 9260 Bluetooth Adapter
Bus 005 Device 011: ID 0403:6014 Future Technology Devices International, Ltd FT232H Single HS USB-UART/FIFO IC
Here is the output from "dmesg":
[ 7504.886984] usb 5-2: new high-speed USB device number 10 using xhci_hcd
[ 7505.020977] usb 5-2: New USB device found, idVendor=0403, idProduct=6014, bcdDevice= 9.00
[ 7505.020982] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7505.020985] usb 5-2: Product: Digilent USB Device
[ 7505.020987] usb 5-2: Manufacturer: Digilent
[ 7505.020989] usb 5-2: SerialNumber: 210299A1FEC9
[ 7505.025257] ftdi_sio 5-2:1.0: FTDI USB Serial Device converter detected
[ 7505.025283] usb 5-2: Detected FT232H
[ 7505.026922] usb 5-2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 7789.977776] usb 5-2: USB disconnect, device number 10
[ 7789.978045] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 7789.978061] ftdi_sio 5-2:1.0: device disconnected
[ 7840.309503] usb 5-2: new high-speed USB device number 11 using xhci_hcd
[ 7840.443484] usb 5-2: New USB device found, idVendor=0403, idProduct=6014, bcdDevice= 9.00
[ 7840.443490] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7840.443492] usb 5-2: Product: Digilent USB Device
[ 7840.443494] usb 5-2: Manufacturer: Digilent
[ 7840.443496] usb 5-2: SerialNumber: 210299A1FEC9
[ 7840.447410] ftdi_sio 5-2:1.0: FTDI USB Serial Device converter detected
[ 7840.447438] usb 5-2: Detected FT232H
[ 7840.448976] usb 5-2: FTDI USB Serial Device converter now attached to ttyUSB0
Question
jlaudolff
We updated PCs to Fedora 36 and Vivado no longer recognizes Digilent HS3 programmers.
I can see that the devices are recognized by the OS using "lsusb" and "dmesg", but vivado does not show the programmer in the Vivado gui.
I know the HS3 and target FPGA device are good because the hardware works with Vivado on Windows. The issue is with Fedora 36 and Digilient HS3. This setup worked with Fedora 35.
Here is the output from "lsusb":
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 003: ID 8087:0025 Intel Corp. Wireless-AC 9260 Bluetooth Adapter
Bus 005 Device 011: ID 0403:6014 Future Technology Devices International, Ltd FT232H Single HS USB-UART/FIFO IC
Here is the output from "dmesg":
[ 7504.886984] usb 5-2: new high-speed USB device number 10 using xhci_hcd
[ 7505.020977] usb 5-2: New USB device found, idVendor=0403, idProduct=6014, bcdDevice= 9.00
[ 7505.020982] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7505.020985] usb 5-2: Product: Digilent USB Device
[ 7505.020987] usb 5-2: Manufacturer: Digilent
[ 7505.020989] usb 5-2: SerialNumber: 210299A1FEC9
[ 7505.025257] ftdi_sio 5-2:1.0: FTDI USB Serial Device converter detected
[ 7505.025283] usb 5-2: Detected FT232H
[ 7505.026922] usb 5-2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 7789.977776] usb 5-2: USB disconnect, device number 10
[ 7789.978045] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 7789.978061] ftdi_sio 5-2:1.0: device disconnected
[ 7840.309503] usb 5-2: new high-speed USB device number 11 using xhci_hcd
[ 7840.443484] usb 5-2: New USB device found, idVendor=0403, idProduct=6014, bcdDevice= 9.00
[ 7840.443490] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7840.443492] usb 5-2: Product: Digilent USB Device
[ 7840.443494] usb 5-2: Manufacturer: Digilent
[ 7840.443496] usb 5-2: SerialNumber: 210299A1FEC9
[ 7840.447410] ftdi_sio 5-2:1.0: FTDI USB Serial Device converter detected
[ 7840.447438] usb 5-2: Detected FT232H
[ 7840.448976] usb 5-2: FTDI USB Serial Device converter now attached to ttyUSB0
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now