Tech Support

[RML]

How can I get someone to contact me?  I have a worksheet from DasyLab 2016 and now have the trail for 2022.

[DAQman]

Hello,

Steps to install DASYLab 2016, 2020, and 2022 on a new computer
1.    Install the InstaCal program. You can get the latest version from https://www.mccdaq.com/Software-Downloads
2.    With the device attached, run InstaCal, add it to the board list, and configure the channels. Close InstaCal
3.    Install DASYLab. The Configurator will run at the end. Enter license info and select the Packages tab. Open the section called Data Acquisition and enable the Measurement Computing driver. Exit the configurator…
4.   If you require an older copy of the DASYLab software, the following is a link to the DASYLab archive: https://mcc.download.ni.com/#Archive/DASYLab/

Best regards,

John

[RML]

Thanks.  I got things up and running.  The worksheet I was using in 2016 does not seem to work correctly in 2022.

It is supposed to play a sound when a value goes above or below a value.  I'm getting an error.  Can you take a look at my worksheet?

Thanks,
Bob

[DAQman]

Hello,

For the 2022 version, did you change computers, or is it the same one? If it's the same computer and the sound plays when using 2016 but not with 2022, send me the worksheet and I'll see what I can find out. Make sure to include the audio file. 

Best regards,
John