I am using Vitis to try and program my flash QSPI device on the 5ev evaluation board. I am not having any luck. Does anyone know of any issue with rev. 2022? It seems like it can't even see the spi flash device. I do have it enabled in the Zynq UltraScale + MPSoc I/O configuration setup.
Question
Luigee
I am using Vitis to try and program my flash QSPI device on the 5ev evaluation board. I am not having any luck. Does anyone know of any issue with rev. 2022? It seems like it can't even see the spi flash device. I do have it enabled in the Zynq UltraScale + MPSoc I/O configuration setup.
error Print out:
Initialization done
Using default mini u-boot image file - /tools/Xilinx/Vitis/2022.1/data/xicom/cfgmem/uboot/zynqmp_qspi_x4_single.bin
===== mrd->addr=0xFF5E0204, data=0x00000000 =====
BOOT_MODE REG = 0x0000
Downloading FSBL...
Running FSBL...
===== mrd->addr=0xFFD80044, data=0x00000000 =====
===== mrd->addr=0xFFD80044, data=0x00000003 =====
Finished running FSBL.
U-Boot 2022.01-06940-g8ed6b9e (Feb 24 2022 - 09:50:51 -0700)
Model: ZynqMP MINI QSPI SINGLE
Board: Xilinx ZynqMP
DRAM: WARNING: Initializing TCM overwrites TCM content
256 KiB
EL Level: EL3
Multiboot: 0
Loading Environment from <NULL>... OK
In: dcc
Out: dcc
Err: dcc
ZynqMP> sf probe 0 0 0
Failed to initialize SPI flash at 0:0 (error -2)
ZynqMP> Sector size = 0.
f probe 0 0 0
Performing Erase Operation...
sf erase 0 50000
No SPI flash selected. Please run `sf probe'
ZynqMP> Error while communicating with SPI flash device - No SPI flash selected.
Erase Operation failed.
INFO: [Xicom 50-44] Elapsed time = 0 sec.
ERROR: Flash Operation Failed
Link to comment
Share on other sites
9 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now