Luigee

agree!! just like leaving a schematic sheet blank that should have contained the USB Maintenance interface. What was the purpose of that?

Isn't the purpose of purchasing this "evaluation" card to jump start our development? Does it configure any power sequencing?

Does anyone know where I can get a copy of the Code for the Microchip (ATMEGA328PB) Processor on the Genesys-5ev or the Genesys-3eg ?

I am using Vitis to try and program my flash QSPI device on the 5ev evaluation board. I am not having any luck. Does anyone know of any issue with rev. 2022? It seems like it can't even see the spi flash device. I do have it enabled in the Zynq UltraScale + MPSoc I/O configuration setup. error Print out: Initialization done Using default mini u-boot image file - /tools/Xilinx/Vitis/2022.1/data/xicom/cfgmem/uboot/zynqmp_qspi_x4_single.bin ===== mrd->addr=0xFF5E0204, data=0x00000000 ===== BOOT_MODE REG = 0x0000 Downloading FSBL... Running FSBL... ===== mrd->addr=0xFFD80044, data=0x00000000 ===== ===== mrd->addr=0xFFD80044, data=0x00000003 ===== Finished running FSBL. U-Boot 2022.01-06940-g8ed6b9e (Feb 24 2022 - 09:50:51 -0700) Model: ZynqMP MINI QSPI SINGLE Board: Xilinx ZynqMP DRAM: WARNING: Initializing TCM overwrites TCM content 256 KiB EL Level: EL3 Multiboot: 0 Loading Environment from <NULL>... OK In: dcc Out: dcc Err: dcc ZynqMP> sf probe 0 0 0 Failed to initialize SPI flash at 0:0 (error -2) ZynqMP> Sector size = 0. f probe 0 0 0 Performing Erase Operation... sf erase 0 50000 No SPI flash selected. Please run `sf probe' ZynqMP> Error while communicating with SPI flash device - No SPI flash selected. Erase Operation failed. INFO: [Xicom 50-44] Elapsed time = 0 sec. ERROR: Flash Operation Failed