gongll Posted May 26 Share Posted May 26 Hello, I use the instacal setting the USB-QUAD08 to differential, and click OK. Then, open the board configuration, the switch position changed to single-ended mode automatically. In this case,Did I fail to set the differential mode? Link to comment Share on other sites More sharing options...
0 Fausto Posted May 26 Share Posted May 26 Hello @gongll. With InstaCal closed, change the on-board switches, as shown on page 8 of the USB-QUAD08 User's Guide. https://www.mccdaq.com/pdfs/manuals/USB-QUAD08.pdf Regards, Fausto Link to comment Share on other sites More sharing options...
Question
gongll
Hello,
I use the instacal setting the USB-QUAD08 to differential, and click OK. Then, open the board configuration, the switch position changed to single-ended mode automatically. In this case,Did I fail to set the differential mode?
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now