Signal reconstruction using Analog Discovery kit 2 GUI

[doctor_g3]

Hi,

I am using analog discovery kit 2 and I'm facing some issues. 

I have 40 kHz sine wave data stored in a .CSV file. And the sampling rate is 160kHz. Now I want to reconstruct the sine wave and see that in the channel 1 of AD2. How to do that using the GUI script of analog discovery kit 2.

Edited May 20, 2023 by doctor_g3

[attila]

Hi @doctor_g3

Use Custom mode (or any other modes under the Type/Gear menu) and Signal:Pattern for fixed sample rate. For AD2 this also requires power of two number of samples.
Use Play for more samples than the device buffer size, 8k or 16k with AD2s 4th device configuration.