athi03 Posted February 27, 2023 Share Posted February 27, 2023 Hi, I bought a zedboard recently with the PCAM cameras, and I tried to use the PCAM demo available, but the UART does not seem to work and I am not getting any output in the VGA monitor. Could someone please let my know y is this? Regards Link to comment Share on other sites More sharing options...
0 thinkthinkthink Posted February 27, 2023 Share Posted February 27, 2023 Hullo, Where'd you get the demo project from and which version of Vivado are you using ? You can get the latest release for Vivado/Vitis 2022.1 from our github: FMC_Pcam_Adapter Demo Archive. The Vivado hardware project can be found here: https://github.com/Digilent/ZedBoard-HW/tree/FMC-Pcam-Adapter/master. And the Vitis software project is here: https://github.com/Digilent/ZedBoard-SW/tree/FMC-Pcam-Adapter/master. As for the UART interface not working maybe try uninstalling the cypress uart bridge driver and then unplugging and plugging the board back. athi03 1 Link to comment Share on other sites More sharing options...
0 athi03 Posted February 27, 2023 Author Share Posted February 27, 2023 Hi, Thank you for the reply I used this: https://github.com/Digilent/Zedboard-FMC-Pcam-Adapter-Dual-Camera/releases. And vivado 2018.2. I will try with this version. Will this new one work with vivado 2018.2? Regards Link to comment Share on other sites More sharing options...
Question
athi03
Hi,
I bought a zedboard recently with the PCAM cameras, and I tried to use the PCAM demo available, but the UART does not seem to work and I am not getting any output in the VGA monitor. Could someone please let my know y is this?
Regards
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now