UART Interface not working with the Zedboard PCAM Demo

[athi03]

Hi, 

I bought a zedboard recently with the PCAM cameras, and I tried to use the PCAM demo available, but the UART does not seem to work and I am not getting any output in the VGA monitor. Could someone please let my know y is this?

 

Regards

[thinkthinkthink]

Hullo,

Where'd you get the demo project from and which version of Vivado are you using ?

You can get the latest release for Vivado/Vitis 2022.1 from our github: FMC_Pcam_Adapter Demo Archive.

The Vivado hardware project can be found here: https://github.com/Digilent/ZedBoard-HW/tree/FMC-Pcam-Adapter/master.

And the Vitis software project is here: https://github.com/Digilent/ZedBoard-SW/tree/FMC-Pcam-Adapter/master.

As for the UART interface not working maybe try uninstalling the cypress uart bridge driver and then unplugging and plugging the board back.

[athi03]

Hi,

Thank you for the reply

I used this: https://github.com/Digilent/Zedboard-FMC-Pcam-Adapter-Dual-Camera/releases. And vivado 2018.2. I will try with this version. Will this new one work with vivado 2018.2?

 

Regards