FMC-HDMI target device

[tatsu_chang31]

The question is about the target devices of FMC-HDMI products released by digilent. I am using Virtex ultrascale + VCU118 from xilinx and want to output images via HDMI. At that time, I would like to use FMC-HDMI issued by digilent. Is it supported?

 

[JColvin]

Hi @tatsu_chang31,

I have not personally used the FMC-HDMI module, but would say that since both it and Xilinx's VCU118 follows the VITA 57.1 specification, they are physically and electrically compatible with each other. Do note that there is an errata regarding a fix to the on-board EEPROM to correctly address some FRU functionality: https://digilent.com/reference/fmc_hdmi/refmanual#errata.

However, Digilent does not have a reference design for using this product.

Let me know if you have any questions.

Thanks,
JColvin

[tatsu_chang31]

Dear @JColvin

Thank you for your reply!  I would like to investigate a little more.