I need to use the AD2 / AD Pro for some analog/digital signal measurements.
I have a few questions before I make the purchase.
Can I acquire both the Analog as well as Digital input channels simultaneously with MATLAB?
Can I change the Gain of an Analog Channel from MATLAB? If so, how?
After changing the gain, does the resolution of 14bit apply to this amplified value? i.e. if with 1X gain the input range is +-25V, and the 14 bits are mapped to this voltage range, Does making the gain 10X, make the 14bits map to the new range? i.e. +-2.5V? Thus increasing the precision of the system to low voltages?
In my test setup I need to probe (2 analog) signals which will vary in terms of mV (lets say 1-2mVs) and 2 Digital signals simultaneously. Will I be able to measure these small signals with AD2 or AD Pro, If so, which one will be better?
Question
spbhanus
Hello all,
I need to use the AD2 / AD Pro for some analog/digital signal measurements.
I have a few questions before I make the purchase.
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now