I need to run a small signal input to an amplifier. The small signal (0-0.5Vpp or more, however, operation should be around 0.25-0.3Vpp) will always be 10kHz. The output should be able to be turned ON or OFF with an external switch and ramped using a voltage 0-10V with at least 10mVpp resolution on the output.
Can the analog discovery 2 devices be programmed (set and forget) to use DI as ON/OFF and AI amplitude control?
I'm not trying to continuously have a computer connected. Just want to program it for 0.25max vPP 10kHz output amplitude control AI pin and On/Off DI pin.
Question
alexplcguy
I need to run a small signal input to an amplifier. The small signal (0-0.5Vpp or more, however, operation should be around 0.25-0.3Vpp) will always be 10kHz. The output should be able to be turned ON or OFF with an external switch and ramped using a voltage 0-10V with at least 10mVpp resolution on the output.
Can the analog discovery 2 devices be programmed (set and forget) to use DI as ON/OFF and AI amplitude control?
I'm not trying to continuously have a computer connected. Just want to program it for 0.25max vPP 10kHz output amplitude control AI pin and On/Off DI pin.
Would you recommend any other devices?
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now