Analog Discovery 2 Broken Scope

[PK1]

Hi! 

The scope seems to be messed up on my Analog Discovery 2 Board. The signals I am getting from the waveform generator are noisy and incorrect. The circuit I am testing now has been done before without issue. Now, the resulting signal is all over the place. Is there a solution to this? I have checked the connections and they are all solid. I don't think the waveform generator is the issue as I have checked the voltages with a multimeter and everything seems to be correct. 

 

[JColvin]

Hi @PK1,

I have moved your question to a more appropriate section of the Forum.

Could you provide a picture of your setup? And when you said that the circuit you are testing has been working without issue before, was this also with the Analog Discovery 2 or a different test setup?

Thank you,
JColvin

[attila]

Hi @PK1

To test the device, connect the W1 to 1+ and W2 to 2+, generate signal with Wavegen channels and capture with the Scope.
Please post the screenshot with the Scope capture, Alt+PrtScr in the WF app and Ctrl+V in the answer.