Is this really the only example? In case it is, here some questions:
If I understand aright, the MISO output of the slave/accelerometer is the only channel to send data from the slave to the master/Artix, so this must be the channel to send the acceleration data through?
How can I get access to the XDATA, YDATA, ... registers of the accelerometer?
Question
GrassWood
Hey guys,
I´m trying to get some data from the on-board accelerometer of my Nexys 4 DDR. I got this example code, but it´s a little bit confusing.
https://github.com/Digilent/Nexys-4-DDR-OOB?_ga=2.131134859.587242682.1592601971-598421127.1592234317
Is this really the only example? In case it is, here some questions:
If I understand aright, the MISO output of the slave/accelerometer is the only channel to send data from the slave to the master/Artix, so this must be the channel to send the acceleration data through?
How can I get access to the XDATA, YDATA, ... registers of the accelerometer?
Thanks
GrassWood
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.