Unable to get HS2 to Connect with CMOD A6

[jamesbuchanan1220@comcast.]

Due to the nature of my project, I need to program the cmod a6 with the use of a JTAG programmer. I have a HS2, which is configured AND recognized by iMPACT AND Adept. Unfortunately, when I attempt to program the cmod a6 board, I get the following:

// *** BATCH CMD : Program -p 1 -dataWidth 4 -spionly -e -v -loadfpga 
INFO:iMPACT:583 - '0': The idcode read from the device does not match the idcode in the bsdl File.
INFO:iMPACT:1578 - '0':  Device IDCODE :        00001111111111111111111111111111
INFO:iMPACT:1579 - '0': Expected IDCODE:    00000100000000000000000010010011
PROGRESS_START - Starting Operation.
INFO:iMPACT:583 - '1': The idcode read from the device does not match the idcode in the bsdl File.
INFO:iMPACT:1578 - '1':  Device IDCODE :        00001111111111111111111111111111
INFO:iMPACT:1579 - '1': Expected IDCODE:    00000100000000000000000010010011
PROGRESS_END - End Operation.
Elapsed time =      0 sec.

When I use Adept, I get this:

===== Digilent Adept  =====
  Adept System  Rev 2.7
  Adept Runtime Rev 2.20
  Adept Application Rev 2.4.2
Copyright © 2010
Loading board information...
Warning:  Could not find specific board information
Initializing Scan Chain...
Default information loaded.
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Found device ID: ffffffff
Initialization Failed.
------------------------------------------------------------------

I've soldered the header to the J4 holes on the CMOD A6 correctly. I know that this board work because I've programmed it when I connected it DIRECTLY to my Windows laptop's usb port, by way of cable. 

Am I missing a file? I did put the DLL files in the proper place and was able to have iMAPCT able to see the HS2's SN.

Why is this not working? 

[JColvin]

Hello,

I presume you mean the Cmod S6 rather than the Cmod A6. As mentioned in this thread, the Cmod S6 does not have a JTAG header.

Thanks,
JColvin