mpi Posted February 15, 2020 Share Posted February 15, 2020 I use the Analog Discovery 2 with Waveforms for testing PCBs after they're populated. Is there any sort of pass/fail mask in the Oscilloscope or Spectrum Analyzer? Something like this: https://www.picotech.com/library/oscilloscopes/mask-limit-testing Could this be implemented through scripting? Link to comment Share on other sites More sharing options...
attila Posted February 18, 2020 Share Posted February 18, 2020 Hi @mpi Such mask are not supported but you can use the Script tool or code in View/Logging to validate the measurements. Depending on the test requirements I use to validate: the carrier frequency/magnitude, THD, THDN, cross-talk... other device specific parameters Link to comment Share on other sites More sharing options...
Question
mpi
I use the Analog Discovery 2 with Waveforms for testing PCBs after they're populated.
Is there any sort of pass/fail mask in the Oscilloscope or Spectrum Analyzer? Something like this: https://www.picotech.com/library/oscilloscopes/mask-limit-testing
Could this be implemented through scripting?
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.