chaitusvk Posted January 17, 2020 Share Posted January 17, 2020 Hi I am working on HDMI pass through example from Digilent work shop manual i connected as shown in manual but getting error showimg [BD 41-237] Bus Interface property FREQ_HZ does not match between /v_axi4s_vid_out_0/video_in(100000000) and /v_vid_in_axi4s_0/video_out(200000000) can any one please help in in solving the issue clk out_1 is set to 200Mhz after going through the Xlinx Forum if AXi is made external then its frequency goes to 100Mhz, But how to change i dont know ... Link to comment Share on other sites More sharing options...
JColvin Posted January 27, 2020 Share Posted January 27, 2020 Hi @chaitusvk, Was this successfully resolved in your other thread here? Thanks, JColvin Link to comment Share on other sites More sharing options...
Question
chaitusvk
Hi
I am working on HDMI pass through example from Digilent work shop manual i connected as shown in manual but getting error showimg
[BD 41-237] Bus Interface property FREQ_HZ does not match between /v_axi4s_vid_out_0/video_in(100000000) and /v_vid_in_axi4s_0/video_out(200000000)
can any one please help in in solving the issue
clk out_1 is set to 200Mhz
after going through the Xlinx Forum if AXi is made external then its frequency goes to 100Mhz, But how to change i dont know ...
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.