Following this tutorial:
https://reference.digilentinc.com/vivado/getting-started-with-ipi/start
Get to step 7.6 Launch Vivado SDK - Name the new source file main.c, then click Finish then I get this pop-up:
'mb-gcc.exe - Application Error'
The application was unable to start correctly (0xc0000142)
I'm also getting the following in the bottom middle window of the SDK
make: *** [subdir.mk:20: main.o] Error -1073741502 arty7 C/C++ Problem
I found a similar post on this site from 2015 that suggested removing 'mingw' from my path. I've done this and still get the pop-up error
I'm guessing the gcc is not installed correctly but what do I do? Any ideas out there?
Question
AlGee
Following this tutorial:
https://reference.digilentinc.com/vivado/getting-started-with-ipi/start
Get to step 7.6 Launch Vivado SDK - Name the new source file main.c, then click Finish then I get this pop-up:
'mb-gcc.exe - Application Error'
The application was unable to start correctly (0xc0000142)
I'm also getting the following in the bottom middle window of the SDK
make: *** [subdir.mk:20: main.o] Error -1073741502 arty7 C/C++ Problem
I found a similar post on this site from 2015 that suggested removing 'mingw' from my path. I've done this and still get the pop-up error
I'm guessing the gcc is not installed correctly but what do I do? Any ideas out there?
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.