Lina Posted September 8, 2019 Share Posted September 8, 2019 Hello! I'm trying to add FreeRTOS's TCP/IP source files into a project that uses the Cerebot Mx7ck board. I looked through the demos they provide and wasn't able to find anything related, so I've been trying to port FreeRTOS+TCP by following the process described on their website: https://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/Embedded_Ethernet_Porting.html#NetworkBufferDescriptor_t I was wondering if anyone has successfully done this before? So far the project builds with all the TCP/IP files included, but I'm struggling to figure out all the pieces needed to get the Ethernet MAC driver setup and pointers would be appreciated. Thanks! Link to comment Share on other sites More sharing options...
JColvin Posted October 15, 2019 Share Posted October 15, 2019 Hi @Lina, I apologize for the delay. Digilent does not have any materials using an MX7 based board with FreeRTOS. It seems that MPLAB Harmony from Microchip has some material (such as the one here), though they all use an Ethernet starter kit, and I'm not certain how easily that could be adapted to the already included Ethernet hardware. Thanks, JColvin Link to comment Share on other sites More sharing options...
Question
Lina
Hello!
I'm trying to add FreeRTOS's TCP/IP source files into a project that uses the Cerebot Mx7ck board. I looked through the demos they provide and wasn't able to find anything related, so I've been trying to port FreeRTOS+TCP by following the process described on their website: https://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/Embedded_Ethernet_Porting.html#NetworkBufferDescriptor_t
I was wondering if anyone has successfully done this before? So far the project builds with all the TCP/IP files included, but I'm struggling to figure out all the pieces needed to get the Ethernet MAC driver setup and pointers would be appreciated.
Thanks!
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.