I need to sample the serial output of an ADC. The data of the ADC is provided with 300MHz. Since a lot of data has to be captured, the acquisition time is approx. 14ms. Can I use the Logic-instrument of the DD and have the data saved to a file for later processing?. I have tried some setups (800MHz), however I only get 32k samples, yielding a 1.5MHz sample rate (wich is way too slow).
Question
Maiki
I need to sample the serial output of an ADC. The data of the ADC is provided with 300MHz. Since a lot of data has to be captured, the acquisition time is approx. 14ms. Can I use the Logic-instrument of the DD and have the data saved to a file for later processing?. I have tried some setups (800MHz), however I only get 32k samples, yielding a 1.5MHz sample rate (wich is way too slow).
Thanks for any advice
Mark
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.