basys3 broke? or not

[D-Day]

when plug board,  led14 bright. I try to reset it but it's not disappear. first time I think switches broke but now when I try to generate some code to board , board would run the previous code, So now I cannot run another code.  Can I repair it? I need to do final project.

[jpeyron]

Hi @D-Day,

To clarify the situation. You power on the board with the mode jumper JP1 set to QSPI. The QSPI project configures the Basys 3 correctly. LD14 stays on no matter the position of the corresponding switch. 

Have you tried cleaning the contacts of the switch?

To configure the Basys 3 with a different project make sure the mode jumper JP1 is set to JTAG. 

Please configure the Basys 3 with the Keyboard demo here. Does the LD14 still stay on?

thank you,

Jon

 

 

[D-Day]

yeah, I already tried to reset it still light on and I tried another code project. The demo code that you wanted me to try I didn't see a .xpr to run in vivado, How can I try it?

[jpeyron]

Hi @D-Day,

Here is the GitHub release for the Basys 3 keyboard demo.  Does ld14 stay on while the baysy 3 is configured with the keyboard demo? 

cheers,

Jon