Pavel_47 Posted November 8, 2018 Share Posted November 8, 2018 Hello, Does exist example(s) that show how to access Pmod connectors from PL part of Zynq ? Thanks Link to comment Share on other sites More sharing options...
jpeyron Posted November 8, 2018 Share Posted November 8, 2018 Hi @Pavel_47, What ZYNQ development board are you using? We have a tutorial here that describe how to use the pmod connectors with our Pmods IP Core in the Vivado library here. Make sure you have installed the board files correctly (if you are using a digilent Zynq dev board) as described here. Depending on the type of communication you can use the AXI IIC IP Core, AXI SPI IP Core, AXI UARTLITE which are available in the add IP selection which you used to add the ZYNQ processor. cheers, Jon Link to comment Share on other sites More sharing options...
Pavel_47 Posted November 8, 2018 Author Share Posted November 8, 2018 Hi Jon, Thanks. Zybo board. And I want to apply external signals directly to Pmod connector and process them in PL part ... not in PS. Sincerely Link to comment Share on other sites More sharing options...
jpeyron Posted November 8, 2018 Share Posted November 8, 2018 Hi @Pavel_47, Here is a XADC demo for the Zybo using Vivado 2016.4 that is in Verilog and does not use the PS. cheers Jon Link to comment Share on other sites More sharing options...
Question
Pavel_47
Hello,
Does exist example(s) that show how to access Pmod connectors from PL part of Zynq ?
Thanks
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.