toshas Posted July 19, 2018 Share Posted July 19, 2018 Hi! Could you confirm that FMC-CE will work with Xilinx boards which has only 1.8V Vadj on FMC slot ? Thanks! Link to comment Share on other sites More sharing options...
jpeyron Posted July 19, 2018 Share Posted July 19, 2018 Hi @ululuk, I reached out to one of our design engineers about this forum thread and they responded that the VADJ pins of the FMC connector on the schematic here are tied to a net named “VCC2V5”, which implies that they are expecting the voltage provided by the Carrier to be 2.5V. They did not check the input thresholds of every IC ON the board, but IC7 is a level shifter that takes signals coming from the FMC connector and level shifts them up to 5V so that they can drive the LCD. According to the datasheet for the level translator the minimum voltage required for a level high input is 2.0V. Therefore they do not expect the FMC-CE to work with Xilinx boards that only have 1.8V on VADJ. thank you, Jon Link to comment Share on other sites More sharing options...
toshas Posted August 1, 2018 Author Share Posted August 1, 2018 Thanks! Link to comment Share on other sites More sharing options...
Question
toshas
Hi!
Could you confirm that FMC-CE will work with Xilinx boards which has only 1.8V Vadj on FMC slot ?
Thanks!
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.