SD-Card ZYBO

[imen]

Im new user of Zybo board I read some documents and follow some tutorial in order to be  familiar with this board .

I notice that it has a different hardware configutration.and I didnt unterstand how can I configure to boot with sd card .

I follow this tutorial to create image : https://www.youtube.com/watch?v=bGgPLgnntRk

i READ THIS pdf to know how can I configure hardware the board :SD Card Boot MIO Register Settings of this pdf https://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf

I didnt unterstand what can i do to let the board boot through SD CARD .

Can anyone help pllz to explain more how caan I change the MIO.

my board is Zynq -7010 Development board .

My operating system is windows .

My project to boot linux through sd card and just runing hello word.

 

Thank u 

BEST REGARDS.

[JColvin]

Hi @imen,

I'm not certain which Zybo board you have (the original Zybo or the Zybo Z7-10, both of which have a Zynq-7010 chip), but the quick answer is that if you are looking to boot the board from the SD card, you would need to make sure that the appropriate jumper (JP5 on the original Zybo, JP6 on the Zybo Z7-10) is set to SD rather than JTAG or QSPI.

Otherwise, we have a Petalinux projects for both Zybo boards (original and Z7-10) available on our Wiki here: https://reference.digilentinc.com/reference/software/petalinux/start.

Let me know if you have any further questions about this.

Thanks,
JColvin