I can generate bitstream, run SDK project and program the board. I can use terminal to connect the board and when I run dpti_demo as GDB I can get the following message:
However, when I use the PC program dpti_transfer.exe to try to transfer local file to the board, the PC program crashes. The file I selected is very small and the address I select for the board memory is 0x90000000.
Question
Ares_Li
Hello: I try to run the DPTI demo on Nexys Video board. My vivado version is 2015.4 and my computer's OS is Win10 64 bit.
I follow the guidance from https://reference.digilentinc.com/learn/programmable-logic/tutorials/nexys-video-dpti-demo/start
I can generate bitstream, run SDK project and program the board. I can use terminal to connect the board and when I run dpti_demo as GDB I can get the following message:
--- Entering main() ---
******************************
* User Peripheral Self Test
******************************
User logic slave module test...
- slave register write/read passed
Reading Header from PC
However, when I use the PC program dpti_transfer.exe to try to transfer local file to the board, the PC program crashes. The file I selected is very small and the address I select for the board memory is 0x90000000.
Wish someone can give me solution or workaround.
Thank you very much.
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.