Sandeep Anand

Hi, We are planning to start a project using MCC USB-1808X DAQ. For that we need the following clarifications, 1. We understands the configuration of MCC USB-1808X device can be done through DASYLab. Is it possible to do the same or change the configuration of DAQ through any embedded system based ARM processors without DASYLab ? 2. What is the data format (payload / packet order) of the configuration file to write to the DAQ ? 3. Whether the configuration will change if the DAQ goes through power cycle ? Thanks & Regards, Sandeep

Hi, We are considering MCC USB-1808X: High-Speed, High-Precision, Simultaneous USB DAQ Device for one of our application. Please let us know the following details. 1. Whether input voltage levels of this DAQ can be programmed ? If yes, Whether it is through any UI/tool from Digilent or It can be controlled through our code ? 2. Any kind of filter/ processing(Blackman Harris / FFT) is happening inside the DAQ on fetched data ?

Can you please suggest any of your DAQ product can meet this ? 1. Twelve Analog input channels and one IEPE channel for vibration measurement / Eight AI channels and one IEPE channel 2. Sample rate >= 50 kS/s per channel 3. USB interface to external processor / Edge computer 4. The DAQ should have the capability to fetch data in every 1 micro second interval and send it to the edge computer or DAQ should have enough buffer to hold the fetched data until it send to edge computer 5. Timestamping in microsecond interval is preferred for fetching data. 6. Input voltage level shall be >= ± 1Vpp 7. Operating temperature shall be >= 60 °C 8. Humidity shall be 5% to 95% RH, Noncondensing