OmerKv

Hi Guillaume I highly appreciate your prompt reply. My main concern is regarding the PS pinout. Xilinx do not include in the XDC the pinout of the PS. In my project I need to use the DDR (for the configuration - no many pins to look for). In your project did you use the PS and the DDR? Regards Omer

Hi I am referring to the ADC. The location of the file: https://github.com/SYZYGYfpga/brain-sample-hdl/tree/master/pod-adc-ltc2264 The above design includes a PS which include the DDR and configuration of the board. I thought there is a reference design which include PS+PL which will be the base to modify and create design. As it seems - I may need to modify the XDC, I hope there is no other issues with the PS configuration.... Regards Omer

Hi Arthur Thank you very much for your prompt reply. Can you refer me to a reference design by Digilent which include a PS+PL design? Regards Omer

Hi I downloaded the XDC file from the following location: https://github.com/Digilent/digilent-xdc/blob/master/Eclypse-Z7-Master.xdc I see contradictions between the file and the schematics of the board. I downloaded a reference design which includes the PS (pod-adc-ltc2264). From the XDC file of the design there is a pin B7 for adc_out1_p which do not appear in the above file. I took the design because I didn't find any other reference design which include a PS configuration (DDR, flash and other ports). Also, as I understand the ZMOD ADC include one ADC but the outputs from ADC A are not connected and instead the outputs from both ADC's are multiplexed as function of DCO state from ADC B Regards Omer