RonM

We are getting closer, but I'm running into a roadblock when I run the Configurator. See the image below.

Where do I find the configurator? I have the Dasylab installer, but can't find the configurator. Searching for it on the MCC website returns no results.

Thanks, Fausto. I'll try this. Yes - I have my license number, and the # days remaining message is gone.

I bought and installed DasyLab today, and am having some difficulties. I received an order confirmation email but not a license key. I selected the trial version so I could get started - comparatively minor issue I mimicked a colleague's configuration, but cannot acquire data. When I press play an error box appears: "OpenAudioInput(1): The specified format is not supported or cannot be translated. Use the Capabilities function to determine the supported formats." I have not knowingly configured any audio for this setup. When I add a DDE Output module to create a running Excel file as my colleague's setup does, DasyLab returns a different error: "Cannot create DDE link." /I ran Instacal before trying to set this up, and verified the USB-201 connection to the PC with the Flash LED function, then left Instacal running. DAQami recognizes the module, and responds when I introduce voltage from a battery. A screenshot of the configuration without the DDE module is attached. The analog input module is set to 1Hz and +/- 10V input. The average module is set for 60 values to deliver 1 minute averages. 7/6/2023 update: I updated the software and firmware. At first, DasyLab was logging zeros, even when I connected a 9V battery to the active channel (Ch0) but inexplicably, the audio input error returned. The analog check reads ~1.7V when nothing is connected to the analog inputs, and ~9.5V when I connect a 9V battery. I verified the 9.5V value with a handheld volt meter. InstaCal Calibrate menu options are greyed out, so I am unable to perform that step, but I have left InstaCal running in the background. MCC device: USB-201 DASYLab version 16.0.0, Build 501 InstaCal version 6.73 Windows OS version: Windows 11 Hardware/wiring: one 9v battery attached to Ch0 and Agnd0