GSAS - Karthick

1. Which alternate card for MCC USB-3114 supports R2017a for Analog Output? 2. Which Matlab versions support Analog output for MCC USB-3114 16 Channel analog voltage output device (high-drive) with eight digital I/O, and one counter input? 3. Which alternate card for MCC USB-QUAD08 supports R2017a for Encoder? 4. Which Matlab Versions support MCC USB-Quad08? 5. Are there any example scripts available for the R2017a tool chain that can be used with MCC USB2637

Any solutions on how to use the analog outputs ?

Do MCC USB-3114, MCC USB-QUAD08, and MCC USB-2637 support the Matlab R2017a version? If it supports, does the existing examples scripts can be used ?

Hi, Could you please let me know if have any protective cases of USB-2637?

Hi, Could you please let me know if there is a speed limitation on the encoder (MCC USB-QUAD08: Quadrature Encoder USB Device) in rpm? if not, what is the maximum speed which we can measure up to?

Hi Fausto, 1. Could you please let me know if you have example scripts available for the PCI cards? 2. Do you have a breakout box for the PCI Cards?

Hi, Can you please let me know if the MCC DT3x Series PCI Boards are supported through MATLab ?

Hi, Could you please tell me the accuracy of MCC USB-DIO96H: 96 Channel Digital I/O USB Device SKU: 6069-410-032

Hi, Could you please let me know if Digilent MCC DAQs are CEMILAC(Centre for Military Airworthiness and Certification) Certified?

Hi, Could you please explain the warranty terms for the below FPGA Boards? 1. 410-319-1 : Arty A7-100T: Artix-7 FPGA Development Board 2. 410-183 : Basys 3 Artix-7 FPGA Trainer Board: Recommended for Introductory Users.

Hi, We have been thinking of procuring the 1. Basys 3 Artix-7 FPGA Trainer Board 2. Cmod A7-35T Board. Could you please suggest the necessary USB-based hardware to program the same from Digilent?

Hi Fausto, We need a minimum of 5 channels, with options for storage, and should measure current from 5-20 mA. it should have a USB Connectivity.

Hi, Can i please know if the DAQ with USB interface that could log the Voltage & current has an inbuilt storage. If So, please suggest a module

Hi, I just want to know if you have a DAQ that can work on battery for temperature application. It can be either temporary or permanent. If there is please suggest a module.

Thank you for your information

I have installed the .exe but the QuickDaq basic is running as an eleuation license. Is there any permanent solution for this?

i cannot find the link for the QuickDAQ Basic Package to download

Hello Fausto, Thank you for your quick response.

The WebDAQ 504 can capture the Acoustic Data. Could it perform the operation in a Standalone mode? After a create the Job profile in our software, can we disconnect the WebDAQ 504 from our PC? After it is disconnected could the WebDAQ 504 capture the data related to the Job profile and keep the data in storage to be viewed later If WebDAQ 504 cannot perform the Stand Alone mode, could you please suggest a DAQ for Acoustic that could work on Stand-Alone mode?

Can I please know which version of android the ZedBoard Zynq-7000 ARM/FPGA SoC Development Board can support?

Could you please help us with a video of WebDAQ 904 with simultaneous capturing of temperature and resistance? From the initial creation of a job to acquisition to logging.

Could you please let me know if there is any memory size limitation for the SD Card Slot?