GSAS - Karthick

I want to use DASY lab to integrate USB-2408-2AO, E-TC in a single PC. Which version can should I use? As I understood there are Lite, Basic, Full, and Pro versions available.

Hi, Can I stack four USB-2404-UI devices to achieve 16 channels for receiving data from multiple target sensors interface with a USB hub and upload the data to a single PC?

Hi, can you please share the BSP for ZedBoard Zynq-7000 ARM/FPGA SoC Development Board

Hi Attila, Could you please let us know the below. 1. What is the sampling depth of the logic analyzer 2. what is the fastest digital signal can we capture

Hi, Could you please let us know how we could use the custom interpreter? If you have any documentation, Please share.

Hi, Can I use Analog Discovery 3 Logic Analyzer to measure the LIN Protocol Data lines

Hello Fausto, Any update on the above?

Hello Fausto, They are using 52 Single Axis Accelerometers in 25 Railway Coaches to measure the Vibration Data from the Train Coaches. They will be using a maximum of two sensors per train, they want to connect all the sensors to the DAQ either at the end of the coach or at the center of it. This way is preferred because it is easier to connect with a UI. The maximum sampling rate for their application is 100K.

Hello Fausto, I will get the sensor datasheet shortly. If the cable lengths are of the same length, can we guarantee there won't be any loss of data?

Hi, One of my customers will use DT9857E with 64 expandable channels connected across 52 sensors through BNC cables. They will be capturing data from vibration sensors across 25 railway compartments. 1. Will there be any loss of data because of the length of the cable? 2. The maximum sampling size of the module, will it change when it's expanded to 64 channels. 3. If the sampling rate varies, what is the max sampling rate for individual channel when it is expanded to 64 channels?

1. Which alternate card for MCC USB-3114 supports R2017a for Analog Output? 2. Which Matlab versions support Analog output for MCC USB-3114 16 Channel analog voltage output device (high-drive) with eight digital I/O, and one counter input? 3. Which alternate card for MCC USB-QUAD08 supports R2017a for Encoder? 4. Which Matlab Versions support MCC USB-Quad08? 5. Are there any example scripts available for the R2017a tool chain that can be used with MCC USB2637

Any solutions on how to use the analog outputs ?

Do MCC USB-3114, MCC USB-QUAD08, and MCC USB-2637 support the Matlab R2017a version? If it supports, does the existing examples scripts can be used ?

Hi, Could you please let me know if have any protective cases of USB-2637?

Hi, Could you please let me know if there is a speed limitation on the encoder (MCC USB-QUAD08: Quadrature Encoder USB Device) in rpm? if not, what is the maximum speed which we can measure up to?