[When will this be available? USB-3114]

Thanks

[When will this be available? USB-3114]

We have an upcoming project that will require 32 channels of output

The Website says none available check later

When will the stock be in so I can place an order

 

Thanks

 

Jim Presley

[Read Excel Data and Output a Voltage Set Up - DASYLab Help Needed]

Thank You so much!

After the tips and doing some of the video courses I have it set up and it is sending the required signal perfectly.

I verified it for every channel using a multimeter and then checked a simulated run by reprocessing  some files from previous tests and recording the outputs on a different Daq we routinely use on field projects for all 8 channels

[Read Excel Data and Output a Voltage Set Up - DASYLab Help Needed]

I have checked into this and I am going through it..

Ran into this error and Not sure how to fix it.

 

What do I do to fix it?

 

 

[Read Excel Data and Output a Voltage Set Up - DASYLab Help Needed]

Thanks

 

It had to be easy

I will play around with it

[Read Excel Data and Output a Voltage Set Up - DASYLab Help Needed]

I am trying to set up DasyLab to read a value in Excel and Convert it to a 0 to 10 Volt Output or a 4 to 20 mAmp Output.

What I want to do is have it read a value and send it as a signal in the simplest most direct manner possible.

Here is the Excel Sheet I want to read.

The values in the Yellow Box are the signal I want to send out.

I have a USB-3104 to send the signal

Any help would be greatly appreciated.

I can do a 1:1 phone consultation as well 

I am a total beginner with both of these units

Thanks

Data Example FID Volt Out.xlsx

[Hello & Help]

I could also send it as a 0 to volt signal to a signal converter if that's easier like this file

Data Example FID Volt Out.xlsx

[Hello & Help]

Hello!

I have a question?

Hello

 

I have a USB-3104 Unit and DasyLab 2020 Software

 

I am trying to set it up so that it will read the yellow filled cells in the attached Excel Spreadsheet and send the exact value out as a 4-20 mAmp Signal to the process unit via a 100 ft cable.

 

I am totally lost on how to do that.

 

Could I get an idiots version of a step by step procedure to set up the DasyLab and configure it to do this.

 

Thanks

 

 

Jim Presley

Data Example FID.xlsx