Jump to content

Jim Presley

Members
  • Posts

    8
  • Joined

  • Last visited

Everything posted by Jim Presley

  1. We have an upcoming project that will require 32 channels of output The Website says none available check later When will the stock be in so I can place an order Thanks Jim Presley
  2. Thank You so much! After the tips and doing some of the video courses I have it set up and it is sending the required signal perfectly. I verified it for every channel using a multimeter and then checked a simulated run by reprocessing some files from previous tests and recording the outputs on a different Daq we routinely use on field projects for all 8 channels
  3. I have checked into this and I am going through it.. Ran into this error and Not sure how to fix it. What do I do to fix it?
  4. I am trying to set up DasyLab to read a value in Excel and Convert it to a 0 to 10 Volt Output or a 4 to 20 mAmp Output. What I want to do is have it read a value and send it as a signal in the simplest most direct manner possible. Here is the Excel Sheet I want to read. The values in the Yellow Box are the signal I want to send out. I have a USB-3104 to send the signal Any help would be greatly appreciated. I can do a 1:1 phone consultation as well I am a total beginner with both of these units Thanks Data Example FID Volt Out.xlsx
  5. I could also send it as a 0 to volt signal to a signal converter if that's easier like this file Data Example FID Volt Out.xlsx
  6. Hello! I have a question? Hello I have a USB-3104 Unit and DasyLab 2020 Software I am trying to set it up so that it will read the yellow filled cells in the attached Excel Spreadsheet and send the exact value out as a 4-20 mAmp Signal to the process unit via a 100 ft cable. I am totally lost on how to do that. Could I get an idiots version of a step by step procedure to set up the DasyLab and configure it to do this. Thanks Jim Presley Data Example FID.xlsx
×
×
  • Create New...