Jump to content

Jim Presley

Members
  • Posts

    8
  • Joined

  • Last visited

Jim Presley's Achievements

Newbie

Newbie (1/4)

0

Reputation

  1. We have an upcoming project that will require 32 channels of output The Website says none available check later When will the stock be in so I can place an order Thanks Jim Presley
  2. Thank You so much! After the tips and doing some of the video courses I have it set up and it is sending the required signal perfectly. I verified it for every channel using a multimeter and then checked a simulated run by reprocessing some files from previous tests and recording the outputs on a different Daq we routinely use on field projects for all 8 channels
  3. I have checked into this and I am going through it.. Ran into this error and Not sure how to fix it. What do I do to fix it?
  4. I am trying to set up DasyLab to read a value in Excel and Convert it to a 0 to 10 Volt Output or a 4 to 20 mAmp Output. What I want to do is have it read a value and send it as a signal in the simplest most direct manner possible. Here is the Excel Sheet I want to read. The values in the Yellow Box are the signal I want to send out. I have a USB-3104 to send the signal Any help would be greatly appreciated. I can do a 1:1 phone consultation as well I am a total beginner with both of these units Thanks Data Example FID Volt Out.xlsx
  5. I could also send it as a 0 to volt signal to a signal converter if that's easier like this file Data Example FID Volt Out.xlsx
  6. Hello! I have a question? Hello I have a USB-3104 Unit and DasyLab 2020 Software I am trying to set it up so that it will read the yellow filled cells in the attached Excel Spreadsheet and send the exact value out as a 4-20 mAmp Signal to the process unit via a 100 ft cable. I am totally lost on how to do that. Could I get an idiots version of a step by step procedure to set up the DasyLab and configure it to do this. Thanks Jim Presley Data Example FID.xlsx
×
×
  • Create New...