On page 15 of the Vivado Design Suite High High Level Synthesis document ug871 (17.4) it says
8. Click the part of the button to open the part selection window.
9. Select device xc7k160tfbg484-2 from the list of available devices. Select the following from the drop down ....
Now here we select a part not a board. So my question is since I have the Zybo-Z7-20 board what part do I select?
I know it must be some selection here. I know when I did the Digilentinc "Getting Started with Vivado" that we had to load a board file, but not a part files. So knowing that I have a Zyb0-Z7-20 board what do I do in this step?
Question
Newport_j
On page 15 of the Vivado Design Suite High High Level Synthesis docu ment ug871 (17.4) it says
8. Click the part of the button to open the part selection window.
9. Select device xc7k160tfbg484-2 from the list of available devices. Select the following from the drop down ....
Now here we select a part not a board. So my question is since I have the Zybo-Z7-20 board what part do I select?
I know it must be some selection here. I know when I did the Digilentinc "Getting Started with Vivado" that we had to load a board file, but not a part files. So knowing that I have a Zyb0-Z7-20 board what do I do in this step?
Any help appreciated. Thanks in advance.
Respectfully,
Newport_j
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.