Jon Frey Posted December 30, 2017 Share Posted December 30, 2017 I need to extract the AD2 from its case to straighten a pin. Understandably at my own risk Is there a technique/trick ,as the board is very tight in the enclosure? Link to comment Share on other sites More sharing options...
JColvin Posted January 2, 2018 Share Posted January 2, 2018 Hi @Jon Frey, I imagine you have it out already by now, but what I do is the following: Take the screws out to get the casing apart On the side with the pin labeling, pull out on the casing slightly and push down on the green center circle so that half of the AD2 goes down. Once you can get at the PCB board, push it down out of the "grip" of the green corner pieces. It'll then easily come out for closer examination (or pin straightening). Let me know if you have any questions. Thanks, JColvin Link to comment Share on other sites More sharing options...
Question
Jon Frey
I need to extract the AD2 from its case to straighten a pin.
Understandably at my own risk
Is there a technique/trick ,as the board is very tight in the enclosure?
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.