blink Posted December 8, 2017 Share Posted December 8, 2017 I can find no documentation on how to use the pattern source in the scope under Waveforms 2015 with an Analog Discovery 2. When I select it and have a pattern running, it never triggers the scope. What does the pattern trigger source trigger on? Link to comment Share on other sites More sharing options...
attila Posted December 9, 2017 Share Posted December 9, 2017 Hi @blink The instruments output high trigger level while they are running. The trigger condition is the edge of trigger signal. In case you have infinite run for Patterns this could trigger the Scope only when started. To capture this first start the Scope, also change Auto trigger to Normal to not enter auto triggering, then start Patterns. For repeated acquisitions specify a finite run time and non zero wait in Patterns. This will generate repeated trigger signals. Link to comment Share on other sites More sharing options...
Question
blink
I can find no documentation on how to use the pattern source in the scope under Waveforms 2015 with an Analog Discovery 2. When I select it and have a pattern running, it never triggers the scope. What does the pattern trigger source trigger on?
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.