Matt Ownby Posted November 25, 2017 Share Posted November 25, 2017 Hi, I have some test clips for a different logic analyzer but they don't fit well with the wiring that comes with the Digital Discovery (which I purchased). Can someone point me to some test clips that would work better? For an example of what I am looking for : https://www.amazon.com/Rigol-TC1100-Probe-Analyzer-Module/dp/B01MXXIQZD Link to comment Share on other sites More sharing options...
Alex Posted November 26, 2017 Share Posted November 26, 2017 You can try http://store.digilentinc.com/mini-grabber-test-clips-6-pack-for-use-with-analog-discovery-flywire/ Link to comment Share on other sites More sharing options...
hlipka Posted December 13, 2017 Share Posted December 13, 2017 In my Digital Discovery review at Element14, I looked at some options. The ones you linked to probably work well. But they will be a little bit too thick, so you cannot have more than about 4 beneath each other on a 2.54mm grid. Look for smaller ones, e.g. https://www.amazon.com/grabber-Jumper-Analyzer-Testing-Accessories/dp/B075JF9QGN/ . Link to comment Share on other sites More sharing options...
MortenSchmidt Posted January 10, 2018 Share Posted January 10, 2018 Pomona Micrograbber 5790's work well, but are a bit pricey: https://www.digikey.com/product-detail/en/pomona-electronics/5790-0/501-1387-ND/737448 Link to comment Share on other sites More sharing options...
Question
Matt Ownby
Hi,
I have some test clips for a different logic analyzer but they don't fit well with the wiring that comes with the Digital Discovery (which I purchased).
Can someone point me to some test clips that would work better? For an example of what I am looking for : https://www.amazon.com/Rigol-TC1100-Probe-Analyzer-Module/dp/B01MXXIQZD
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.