ned_zepplin Posted January 10, 2017 Share Posted January 10, 2017 Hi, I just wanted to know if there are any special considerations/requirements/recommendations with regards to selecting Oscilloscope Probes for the Analog Discovery 2? Would this be a good option?http://no.farnell.com/testec/lf312/probe-oscilloscope-low-frequency/dp/220619 Note that I am aware of the Digilent Probes (made for this purpose), but they are not an option in my case. Link to comment Share on other sites More sharing options...
Bianca Posted January 10, 2017 Share Posted January 10, 2017 The Discovery 2 has 1M and 24pF. You need something to compensate the 24pF. What I don't understand from the datasheet of the probes, is what are they referring to when they say compensating range. The probes should have a 9M input resistance, they say 10. 10 should be the 1M from the Discovery + 9 from the probes, not 10 on the probes. Are they referring that the probes can compensate anything from 10-60pF? in that case, the probes should work. Do they refer to the whole, probes + cable? Then it might cause some problems. I saw on our probes review that even with them the user had some issues with compensating. We can't guarantee that it will be ok. The probes that will work with discovery are the ones that can compensate the 24pF. That is what you should be looking for. Regards, Bianca Link to comment Share on other sites More sharing options...
Bianca Posted January 10, 2017 Share Posted January 10, 2017 Hi @ned_zepplin, You can use these probes on x1. I'm not sure if you can use them on x10 because of the compensation range. The x1 doesn't need compensation, so it would be ok. Best regards, Bianca Link to comment Share on other sites More sharing options...
ned_zepplin Posted January 10, 2017 Author Share Posted January 10, 2017 OK, thanks. I need something that can be used at x10 as well. So what compensation range (or other important parameters) should it have to be compatible? Link to comment Share on other sites More sharing options...
ned_zepplin Posted January 10, 2017 Author Share Posted January 10, 2017 OK, then I know what to look for. Thanks again! Link to comment Share on other sites More sharing options...
Question
ned_zepplin
Hi,
I just wanted to know if there are any special considerations/requirements/recommendations with regards to selecting Oscilloscope Probes for the Analog Discovery 2?
Would this be a good option?
http://no.farnell.com/testec/lf312/probe-oscilloscope-low-frequency/dp/220619
Note that I am aware of the Digilent Probes (made for this purpose), but they are not an option in my case.
Link to comment
Share on other sites
4 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.