Unable to read FPGA Bitstream

[Sophia_123]

I have built a program in PL and PS with vivado. Then I generated a bitstream and launched sdk.All settings were done,when I program FPGA in sdk,there were some problems.

09:27:17 ERROR : Unknown processor type ps7_cortexa9 while tryingto figure out bootloop path
09:27:17 ERROR : Unknown processor type ps7_cortexa9 while tryingto figure out bootloop path
09:27:27 ERROR : FPGA Configuration failed.Failed to download the bit file

    Unable to read FPGA Bitstream 'C:/Users/24014/Desktop/test/zynq_2014_3/test_all_5/test_all_1/test_all_1.sdk/top_proc_hw_platform_0/download.bit'.
    Check if the file exists and is valid.

I don't know what happened,it seems all right..

Regards,

Sophia

test_all_1.pdf

[Bianca]

Hi Sophia,

Please use a shorter path for your design. Vivado and SDK are known to have problems with long paths. Don't use more than 2, maximum three folders, and try again.

Best regards,

Bianca