1-Is there a way to use the AD2 as an SPI slave and send bytes through the MISO while the Master is transmitting?
2-I am experimenting with the Python examples of the SPI Spy (Digital_Spi_Spy.py). I have a microcontroller sending a byte every second (at 159kb/s), so when reading 300 samples I get (each number represents the binary state of the digital pins of the AD2, e.g. "1" means only "D0" set):
The byte ("0x11") is being detected properly (underscored numbers) but I dont understand how the captures works. Why all the 5 when no trigger is active in the clock line?
Question
rafa_uy
Hello,
I have two separate questions:
1-Is there a way to use the AD2 as an SPI slave and send bytes through the MISO while the Master is transmitting?
2-I am experimenting with the Python examples of the SPI Spy (Digital_Spi_Spy.py). I have a microcontroller sending a byte every second (at 159kb/s), so when reading 300 samples I get (each number represents the binary state of the digital pins of the AD2, e.g. "1" means only "D0" set):
[1, 1, 1, 3, 1, 1, 1, 3, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 1, 1, 1, 3, 1, 1, 1, 3, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 1, 1, 1, 3, 1, 1, 1, 3, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 1, 1, 1, 3, 1, 1, 1, 3, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5]
The byte ("0x11") is being detected properly (underscored numbers) but I dont understand how the captures works. Why all the 5 when no trigger is active in the clock line?
The trigger configuration is:
dwf.FDwfDigitalInTriggerSet(hdwf, c_int(0), c_int(0), c_int((1<<idxClk)|(1<<idxCS)), c_int(0))
Is there any command to adjust the sample rate of the trigger? Or is it working as fast as it can?
Thank you,
R
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now