connector between pcam camera and pmod

[Jonathan20]

Hi,

I've bought this product:

https://digilent.com/shop/pcam-5c-5-mp-fixed-focus-color-camera-module/

And I'm interested in interfacing it with Arty-z7 20 board pmod.

Is there a connector between the camera module ribbon cable and board pmod?

Edited November 19, 2023 by Jonathan20
delete photo

[artvvb]

Hi @Jonathan20

No, Digilent doesn't provide any Pmod -> Pcam adapters. The options are either a Zybo Z7 or a host board that supports the FMC Pcam Adapter.

Thanks,

Arthur

[Jonathan20]

I bought already Zynq Arty-z7. Can you suggest me an of the shelf adapter for my needs?

[Jonathan20]

Hi. 

I soldered the FFC cable pins to wires so I will be able attach them to the board PMOD.

However, it turns out that this option is blocked by vivado.

I can't route the camera module pins to PMOD fpga pins on the Arty-z7 20 [Camera pins voltage is: HSUL_12]

Any solution for that, or should I buy new board that have built in MIPI connector?

[artvvb]

There might be devices out there that can do the appropriate level translation, but that could get to the point of designing your own adapter from scratch. I'd recommend using a board with the connector.