My understanding is that the 10mV +/-0.5% are offset and gain accuracy specs. Are there any specs on the noise floor for the AD3? With + and - shorted with a jumper it looks like there's 10mV of noise on low range, which seems high (~5 LSB). Is that expected? What's the source of all that noise? Are there any configuration changes or hardware modifications that can be done to reduce the floor without significantly impacting bandwidth (i.e., not just averaging a bunch)?
Question
dns
My understanding is that the 10mV +/-0.5% are offset and gain accuracy specs. Are there any specs on the noise floor for the AD3? With + and - shorted with a jumper it looks like there's 10mV of noise on low range, which seems high (~5 LSB). Is that expected? What's the source of all that noise? Are there any configuration changes or hardware modifications that can be done to reduce the floor without significantly impacting bandwidth (i.e., not just averaging a bunch)?
Thanks!
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now